Please note that these are slightly bigger than the standard 24oz cups. Measurements are: Length: 29cm Height/Width 18cm. These can be trimmed down or cut around.
UV DTF is ultra durable, waterproof and longer lasting over conventional vinyl, however extra care is required when applying.
Application:
- When preparing your surface please ensure it is grease free and DO NOT use alcohol, we recommend just water, but ensure the surface its fully dried before application.
- Peel design away from the provided backing
- For complicated designs we recommend cutting into sections and applying
- Press the transfer down onto your surface firstly rubbing hard with your thumb across all design parts, finally move over to using a squeegee and ensure a good contact with the wrap and squeegee the entire wrap, the longer or more pressing the better (this part is the most important, you need to achieve adhesion across the hole design).
- Very slowly pull away the transfer sheet from the surface, if it seems to be stuck or not adhering correct please return back to step 3.
Please note that unlike vinyl, if these are not applied correctly on the first attempt they will rip.
